7 ft. Clinker Pram

This little boat is a real favourite and probably one of the best I have ever done in terms of fitness for purpose and the pleasure derived from building and usage.

It is also one that I often recommend as a good introduction to traditional methods for home builders. Material cost is very modest, so it is a good place to practice. Building procedure is straightforward. The molds and transoms are set up on a frame, planking is laid, and the shell lifted off the jig. The frames are then steamed and bent into place and fastened. Sounds simple enough, and it is, but there is considerable art in lining out the planks and fitting the rebates. With a transom at either end the fit of every plank is visible, it is a test piece, and the lessons learned here will stand the builder in good stead for larger projects.

Lines plan and specifications for Plan #80 are in the stock plan catalog.

Paul Gartside puts the finishing touches on the varnish of a 7ft clinker pram dinghie.
Putting the finishing touches on the 7ft pram.
A batch of three pram dinghies leaving the varnish shop.
A batch of three pram dinghies leaving the varnish shop. Photo credit: Cindy Lee.
A small boat a long way from home.


More Custom Boatbuilding

Visit the blog
This little boat is a real favourite and probably one of the best I have done in terms of fitness for purpose and the pleasure derived from building and usage.